EKO Wallmount - 12ch x 10A fixed dimmer, RCD and MCB, Screw terminals EKO Wallmount - 12ch x 10A fixed dimmer, RCD and MCB, Screw terminals
4 stars - "Review for EKO Wallmount - 12ch x 10A fixed dimmer, RCD and MCB, Screw terminals" This EKO Wallmount - 12ch x 10A fixed dimmer, RCD and MCB, Screw terminals is the best Control I have tried.
LSC Lighting Systems

EKO Wallmount - 12ch x 10A fixed dimmer, RCD and MCB, Screw terminals

Product ID: EKO24-10T
Brand: LSC Lighting Systems
From: $8,574.00 AUD

View or buy the Control Lighting - EKO Wallmount - 12ch x 10A fixed dimmer, RCD and MCB, Screw terminals from LSC Lighting Systems to discover other options and shipping details.

Description

EKO DESCRIPTION

EKO TRUpower RCBO - 24ch x 10A fixed installation dimmer, TRUpower, Circuit Breaker Detect, DMX input, LNET enabled, RCD + MCB per channel protection, three phase input via 35mm2 screw terminals.

The EKO wallmount installation dimmer is available in 6-, 12- and 24-channel versions with a choice of output capacities. EKO dimmers incorporate a cleverly designed installation frame that can be fixed in position without the dimmer being present. Load and control screw terminals on the frame allow for building wiring to be terminated in a clear and unhindered manner.

When the installation is ready for commissioning, the dimmer can be hung on the installation frame and output circuits then plugged into the special screw terminals – the 24-channel dimmer can be installed onto the frame and made fully operational in under five minutes.

After installation, internal electronics can be easily accessed through the lockable, hinged front door. The door has been designed with reversible hinges and lock allowing the dimmer to be customised to suit the installation environment.

 

FEATURES 

  • One lighting system with push-button and/or live console control. Each individual channel on the EKO can be set to DMX only, architectural only or the unique auto-switch mode for dual control.
  • RDM (Remote Device Management) enabled, allowing the user to change the DMX address of the unit and view any fault conditions including over-temperature and loss of phase or DMX signal from any RDM controller.
  • Auto DMX/architectural switching ensures the EKO always works as expected. Once DMX is disconnected, the system automatically changes back to wall-plate control after a preset time delay of 30 seconds to five minutes.
  • TruPower option – allows any channel to be set to dimming or direct mains power, a world-first created by LSC. More information on TruPower can be found here.
  • Easy installation – the EKO comes with a separate installation frame to allow the mechanical mounting and electrical connections to be completed without the dimmer rack being onsite (ensuring no damage to the dimmer from tradespeople)
  • The frame can be purchased months ahead of the dimmer rack, helping cash flow
  • Max level setting – save energy, save lamp life, save lamp maintenance
  • Intelligent power-up at last-known state – the system returns to the last lighting state after a short-term power failure. If the power fail is longer than two hours, then the unit powers-up with all channels off.
  • Low-profile installation dimmer in 6-, 12- and 24-channel versions
  • 10 Amp or 25 Amp output capacity per channel
  • Designed for quick installation and termination
  • Optional RCD per phase per 12 channels or RCBO per channel
  • 100% duty cycle rated across all channels simultaneously
  • Variable-speed fan cooling
  • Graphic LCD panel with touchscreen operation
  • DMX512A compatible with link Thru connector and input termination switch
  • CE and Ctick approved
 

REMOTE MONITORING

HOUSTON is a Windows PC application that allows remote monitoring of all LNET-enabled products. This includes the TEKO and e24v2 portable touring dimmers, the EKO installation dimmers and the ePlate wall controllers.

Any operational faults, such as Phase Fail, loss of DMX, over-temperature etc, are sent over the Cat5 cable from all of the devices to one or more PCs running the software. The user is immediately notified of a fault when the normally Green status indicator starts flashing Red. A quick glance at the screen gives detailed information about the device affected and the exact nature of the fault.

This information is invaluable for fast diagnostics of any problems in all situations. Large stadium concerts or film schools with dimmer racks in multiple positions can observe what is happening from a central location. Installers can see the status of a remote venue, such as a school or a church, from their office via a Wi-Fi link or internet connection.

HOUSTON even keeps a permanent log of all system events for later viewing. These are stored with the date and time of the fault, allowing further diagnostics of a problem, even if it is not reported until weeks later.

 

SPECIFICATIONS

 EKO 324EKO 312EKO 612EKO 606
Number of Dimmer Channels

24

12

12

6

Channel Output Rating

10 Amps

25 Amps

Channel Output Connector Type

4mm2 screw terminal

10mm2 screw terminal

TruPower Option

Option that allows each channel to be set to dimming or direct mains power via relay

Channel MCB Breaking Capacity

6,000 Amps

Channel MCB Type

1-pole MCB or optional 2-pole RCBO

RCD Protection Option (Qty)

(2)

(1)

(2)

(1)

Current Control Technology  
Dimmer Curve Selection per Channel  
Scene Storage  
Power Switching Component

Triac

Inductor Rise Time

200us

Channel Output Mimic LEDs (Qty)

(24)

(12)

(6)

DMX Data and LNET Indicator LEDs  
Operational Status Indicator LED  
DMX512 Input and Link Thru Connector  
DMX512 Input Termination Switch  
Number of Cooling Fans

2

1

2

1

Fan Cooling Control

Variable

External Software Upgradable  
Power-Up in Last-Known State  
50/60Hz Frequency Auto-Select  
220V 3-phase Current (per phase)

80 Amps

40 Amps

100 Amps

50 Amps

Chassis Style Wallmount installation dimmer with hinged front door
Dimensions W x H x D

480mm x 824mm x 135mm

480mm x 549mm x 135mm

480mm x 824mm x 135mm

480mm x 549mm x 135mm

Weight

35kg

27kg

30kg

21kg

Construction Aluminium and corrosion-resistant steel finish in powder-coat with rear screened polycarbonate labels

DOWNLOADS

More Control and others in our range
Subscribe to GTP iCommerce Pty Ltd Clothing and Hardware