SP5  Signal Processor - Phase Shifter and Metal Loss Corrector SP5 Signal Processor - Phase Shifter and Metal Loss Corrector
5 stars - "Review for SP5 Signal Processor - Phase Shifter and Metal Loss Corrector" This SP5 Signal Processor - Phase Shifter and Metal Loss Corrector is the best Support Products I have tried.
  • SP5  Signal Processor - Phase Shifter and Metal Loss Corrector - Image 1
  • SP5  Signal Processor - Phase Shifter and Metal Loss Corrector - Image 2
  • SP5  Signal Processor - Phase Shifter and Metal Loss Corrector - Image 1
  • SP5  Signal Processor - Phase Shifter and Metal Loss Corrector - Image 2
Ampetronic

SP5 Signal Processor - Phase Shifter and Metal Loss Corrector

Product ID: SP5
Brand: Ampetronic

View or buy the Support Products Assistive Listening Systems - SP5 Signal Processor - Phase Shifter and Metal Loss Corrector from Ampetronic to discover other options and shipping details.

Description

Ampetronic
Phase Shifter & Metal Loss Corrector

The SP5 is a signal processor which introduces a phase shift across the audio band between two separate amplifiers. When specified with a suitable loop design, it is used for a variety of system applications.

Features

  • True 90º phase shift across audio band

  • Compatible with all Ampetronic's professional Induction loop driver range

  • Supplied complete with interconnecting leads

  • Integral metal Loss Correction Control

 

Applications Include

  • Ultra-Low Spill™ systems

  • Rooms with structural metal

  • Adjacent location

  • Balcony cover

  • Large area cover:

  • Stadium

  • Theatres

  • Cinemas

  • Cathedrals

  • Sports Halls

 

An Ultra-Low-Spill™ Induction Loop System uses two carefully designed loop arrays, which are overlaid in the same area, and are driven by two loop drivers. This type of design can reduce the spill field from the loop within 1.5m of the loop perimeter. To minimise any unwanted interaction between the two arrays, the SP5 creates a 90º phase difference between the signals into the amplifiers. The SP5 also incorporates Ampetronic’s Metal Loss Correction system. This same phase shift requirement may also exist when driving balconies which overhang a seating area. The phase shift minimises the interaction between the two loops to deliver a uniform field strength on both floor levels. To greatly reduce the effect of loss due to metal in the building construction, two arrays are often used (as for Ultra-low spill™).

In both cases careful design of the complex loop layout is essential. Ampetronic can offer this design service. The SP5 is built into a standard1/6 rack width unit. Rack mounting trays and blanking plates can also be provided. The SP5 is supplied with the required power lead and input and output signal leads.

Specification:

Frequency Response

85Hz - 6kHz ± 0.5dB (MLC set to minimum, 0dB/oct)

Metal Loss Correction

Adjust to set 0 to 3dB per octave boost across the band
At all settings, the unit has unity gain at 1kHz

Input & Output

Input / Output A

3-pole ¼“ jack socket – for ‘Master’ amplifier
Maximum cable length 1m

Output B

3-pole ¼“ jack socket – for ‘Slave’ amplifier
Maximum cable length 1m

Physical

Environmental

IP30, -10°C to +35°C, 20 – 90% relative humidity

Dimensions & Weight

1U high, 1/6th rack width, install using RM-1U rackmount kit
Width 71mm, Depth 118mm, Height 44mm
Weight 350g

Power

±15V DC 1W max

 
 

Ashton Audio in conjunction with Ampetronic can design your induction loop system for you.  Simple induction loop designs are free, complex array systems will be charged for at a nominal rate.  You can request a design through our 'Contact Us' Enquiry Form.

l

More Support Products and others in our range
Subscribe to GTP iCommerce Pty Ltd Clothing and Hardware