TEKO Wallmount - 12ch x 10A RCD and MCB, Screw terminals, High Risetime inductors.
Description
TEKO DESCRIPTION
TEKO Wallmount - 12ch x 10A RCD+MCB protection per channel, Trupower, Circuit Breaker Detect. Screw terminals for input power and output load circuits. Fitted with High Risetime inductors.
The TEKO wallmount is the newest addition to the EKO/TEKO family of dimmer/switching racks. It provides all the advanced features as standard (including LNET, circuit breaker monitoring and TruPower) in a compact, wallmount chassis with front-mounted outlet sockets.
The removable rear box makes installation easier, as it can be mounted to the wall without the contractor needing to support the weight of the complete dimmer rack.
The TEKO wallmount is available in standard and high Rise Time variants.
Each circuit on the TEKO wallmount is protected by an RCBO (combination MCB + 30mA RCD) protection, rated at either 10A or 25A. Optional Neutral disconnect MCBs can be provided where RCDs are not desirable.
The TEKO wallmount offers a sophisticated touchscreen user interface with many advanced features. The LNET interface provides the ability to connect the TEKO wallmount to the extensive range of wall-plate controllers and BMS interface modules, as well as the Houston system monitoring and configuration software.
FEATURES
- Dimmer and power distribution
- RCBO per channel
- DMX and memory modes – control via DMX or wall-plate control of internal memories
- RDM – Remote Device Management enabled
- Operates on mains input voltages between 90V and 260V phase to Neutral
- 320 x 240 graphical touchscreen user interface
- Visual alarms for Phase Fail, over-temperature and loss of DMX
- PTFD (Pulse Transformer Fired Dimming)
- Local rigger's control
- Auto fan control (user defined)
- Large red/green status LED for instant notification of faults
TEKO wallmount is equally at home in any of the following environments:
- Dimming conventional, LED and neon lights
- Powering moving lights
- Powering LED fixtures
- Theatre
- Film
- Television
SPECIFICATIONS
TWM12/10 | TWM6/25 | ||
---|---|---|---|
Channels
|
12 | 6 | |
Max Load per Channel
|
10 Amps | 25 Amps | |
Thermal Magnetic Breakers
|
![]() |
![]() |
|
RCD/GFI Protection
|
![]() |
![]() |
|
RCD/GFI Current Trip
|
30mA/Channel | ||
DMX-512A Input with RDM Functionality
|
![]() |
![]() |
|
Control Surface
|
320x240 graphical LCD touchscreen | ||
Min and Max Trip Levels per Channel
|
![]() |
![]() |
|
Remote Monitoring and Control via LNET and RDM
|
![]() |
![]() |
|
80 Internal Memories
|
![]() |
![]() |
|
Auto-Switch between DMX and Memory Modes
|
![]() |
![]() |
|
Visual Alarms for Phase Fail, Over-Temperature and Loss of DMX
|
![]() |
![]() |
|
PTFD (Pulse Transformer Fired Dimming)
|
![]() |
![]() |
|
Local Rigger's Control
|
![]() |
![]() |
|
Fan Control
|
Automatical variable speed thermally controlled | ||
Dimming and TruPower Switching per Channel
|
![]() |
![]() |
|
Dimming Curves
|
6 | ||
Operating Temperature Range
|
0-40oC | ||
Output Connector Options
|
/A | 12 x 3-pin 15A Australian outputs | 6 paired Australian outputs (20A + 15A per channel) |
/T | Hardwired | ||
Power Supply
|
Nominal 100-240V, 3-phase star with fully rated Neutral, 50-60Hz, operating range typically 90-260V, 45-65Hz, earthing system: TN-S. |
||
Power Input Connection
|
An M25 nickel-plated, brass cable gland for installing power cable is supplied but not fitted. | ||
Control Input
|
DMX512 (1990) or DMX512-A (E1-11) and RDM (E1-20) via right-hand side panel mounted 5-pin AXR In and Thru connectors. LNET via dual RJ45 Ethercon connectors on right-side panel. | ||
Product Dimensions - W x D x H
|
490 x 280 x 250mm | ||
19.3 x 11 x 9.8 inches | |||
Shipping Dimensions - W x D x H
|
550 x 340 x 310mm | ||
21.7 x 13.4 x 12.2 inches | |||
Product Weight
|
15kg/33lb | 15kg/33lb | |
Product Weight (Packed)
|
20kg/44lb | 20kg/44lb | |
Shipping Weight (Australia)
|
20kg/44lb | 20kg/44lb | |
Shipping Weight (Export)
|
20kg/44lb | 20kg/44lb |