PLS-X5  Loop Amplifier for lecture theatres, auditoriums, churches, departure gates and large rooms PLS-X5 Loop Amplifier for lecture theatres, auditoriums, churches, departure gates and large rooms
4.5 stars - "Review for PLS-X5 Loop Amplifier for lecture theatres, auditoriums, churches, departure gates and large rooms" This PLS-X5 Loop Amplifier for lecture theatres, auditoriums, churches, departure gates and large rooms is the best System Types I have tried.
  • PLS-X5  Loop Amplifier for lecture theatres, auditoriums, churches, departure gates and large rooms - Image 1
  • PLS-X5  Loop Amplifier for lecture theatres, auditoriums, churches, departure gates and large rooms - Image 1

Description

HIGHLIGHTS

PLS-X5  Loop Amplifier for lecture theatres, auditoriums, churches, departure gates and large rooms.


  • 9.5A RMS at 36.5Vpp.
  • Integrated Parametric Metal Loss Correction control (selectable knee at 100 Hz, 500 Hz,1 kHz, 2 kHz).  
  • Three inputs including XLR, Euro block and dual RCA, Input 2 can be set to override and to accept a 50-100V speaker feed.  
  • Integrated System Diagnostics with LED output, Dual action AGC, 10W integrated amp with monitoring speaker output, 3.5mm headphone output, 1/2 RU supplied with rack kit for single or dual mounting.


Space and power efficiency
PLS-X series is the most efficient professional loop drivers available. The units are only 1U high and ½ widths, making it possible to mount two drivers in one single 19" rack mount. Univox PLS-X series uses a 90 % efficient electronic transformer. Energy waste in a conventional power supply is comparably 8-9 times higher. Weight is reduced by use of significantly less copper and other metals than conventional loop drivers, leaving a much smaller carbon footprint. PLS-X loop drivers produces an amazingly clear sound which is not possible using conventional toroid transformers as modulation distortion is unavoidable.


The self-diagnostic system

When activated, input connection, AGC, pre and power driver and consistency of loop conductor will be diagnosed. The diagnostics will indicate what systems are operational and which are not. The built-in signal generator, which is part of the self-diagnostic system, can be used to set just the output level if a different signal source is not available.


Enhanced metal compensation

Univox PLS-X's are equipped with a unique Parametric MLC (Metal Loss Correction) to fine tune for the effects of metal loss. It allows the installer to further compensate for metal damping effects and not just simply by increasing level from one starting frequency.


Ashton Audio in conjunction with univox by EDIN can design your induction loop system for you.  Simple induction loop designs are free, complex array systems will be charged for at a nominal rate.  You can request a design through our 'Contact Us' Enquiry Form. 

FEATURES

  • 5 year warranty

  • 1U high and ½ width (19" rack) for side by side mounting to save rack space

  • Parametric Metal-Loss-Control for various types of metallic influences

  • Built-in System diagnostics, to isolate a system malfunction

  • Programmable XLR, RCA and screw terminal input connectors

  • Dual Action AGC for unsurpassed intelligibility

  • Low frequency masking filter for voice enhancement

  • 50-100 V input

  • Voice alarm system input that overrides all other input signals

  • No internal fans are needed as there is no power leakage. Cooling is due to efficient design

  • 10 W output for connecting a speaker to monitor/verify driver activity

  • Front panel placed controls for easy installer access

  • Recessed controls to prevent tampering

  • Rack mounting kit

DOWNLOADS


Download:  Brochure
Download:  Installation Guide 
Download:  Quick Installation Guide 
Download:  CE Certificate

 
More System Types and others in our range
Subscribe to GTP iCommerce Pty Ltd Clothing and Hardware