VGA + Audio over Fiber Extension Kit Sender + Receiver
Description
Hall Research
VGA + Audio over Fiber Extension Kit (Sender + Receiver)
VGA to Fiber extender with Audio
The HR-722A Fiber Optic Communication System allows direct connection of VGA computers for signal transmission over Fiber Optic cable spanning distances to 2500 ft (0.75 kilometers) on multi-mode or 35 kilometers on single-mode fiber (approximate based on loss budget).
The HR-722A features excellent picture quality with bright and sharp images.
Gone are the usual signal degradation and smearing of coax or twisted pair video transmission at extended lengths. Signal integrity is also maintained through fiber optic cables' immunity to electrical interference and cross talk.
The lightweight and small diameter fiber reduces installation time, particularly since only 1 fiber is needed.
Fiber optic cable also has certain intrinsic benefits for installation success including resistance to electromagnetic interference (EMI), lightning, and the elimination of ground loops through electrical isolation.
- Transmits VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768)
- Supports HDTV resolutions of 480p, 720p and 1080i (RGBHV format only)
- Uses all digital processing and transmission for crystal clear signals and no color pixel skewing
- Requires no adjustments, equalization or de-skewing during installation
- Transmits signals over one single mode or multi-mode fiber optic core at 1310 nm
- Virtually no audio/video skew
- Ideal for digital signage, broadcast or corporate studios, auditoriums, stadiums and theaters, airport or transportation hubs, distance learning, or medical imaging
- Small, lightweight, low power
- Use of Existing Fiber Lines
- Elimination of Ground Loops
Number of Video Channels ............... 1 RGBHV
RGB Processing ................................ 24 bits, no compression or scaling
Input Impedance ................................ RGB: 75 Ohms; H & V: Hi-Z
Input Level .......................................... RGB: 714 mV p-p; H & V: 3 to 5 V p-p
H Sync Frequency Range ...................15 to 60 kHz
V Sync Frequency Range ...................30 to 85 Hz
RGB Format Supported .......................RGB with separate H and V
Audio Specs:
Frequency Response ......................... +0/-0.5 dB, 20 Hz - 20 kHz
Bits-per-Sample/Sampling Rate .......... 24 bits; 54 kHz
Maximum Audio Level.......................... +10 dBu
SNR (A-Weighted)................................ 95 dB
Input Impedance.................................. >24 k Ohms
Output Impedance .............................. < 1 Ohm
Audio to Video Diff. Delay (skew) .......
General Specs:
Operating Temperature Range ........... -20 to +60 degrees C
Optical Connectors............................... ST
Operating Wavelength ........................ 1310 nm
Physical Size ....................................... 5 W x 1.15 H x 5.25 L (inches)
Weight ................................................. approx. 10 oz.; 0.284 kg
