InterM D-3000 Digital Dual Channel Dante Digital Network Audio receiver
Description
DESCRIPTION
The D-3000 is a high power professional amplifier specially designed for the sound re-enforcement market also referred to as SR, which incorporates a DSP, Digital Signal Processor and Audinates’s Dante™ digital audio network.
Dante delivers low latency, robust synchronization, I/O scalability, and installation simplicity via standard IT technology. The D-3000 will deliver up to 3000 watts of power per channel down to 2 ohm loads.
Housed in two RU compact frameworks, the D-3000 Class D amplifier offers high power with reduced size and weight. The combination Class D topology amplification circuitry combined with SMPS (Switch Mode Power Supplies) creates a high efficiency amplifier that offers reduced power consumption and low heat dissipation.
The D-3000 is ideal for applications where high power and efficiency is required. This may include Houses of Worship, arenas, stadiums, concert venues, touring or any other large-scale facilities.
FEATURES
- HIGH PERFORMANCE 2 CHANNEL CLASS-D POWER AMPLIFIER - High performance Class-D Professional Amplifier has up to 3000W (1500W+1500W) power output.
- DANTE Audio Network Transmission Solution Technology - By utilizing Audinate’s DAnte tM solution, audio reception is possible via tCP/IP ethernet network.
- Built-in high performance DSP engine - High performance DsP (Digital signal Processor) is built in to control the Digital Audio signals.
- Webpage (CGI) control & Monitoring - Via tCP/IP ethernet network, adjustments and monitoring of DsP is possible from remote location. * Please download the Webpage operation methods from the Inter-M homepage(international.inter-m.net/en).
- COMPLETE PROTECTION CIRCUITS - Complete circuit protection is activated in case of amplifier overheating, output shorting, overload, over power and DC output.
- SMPS (Switching Mode Power Supply) power scheme - High efficient, light weight sMPs power system is utilized.
- POWERFUL AND DETAILED SOUND QUALITY - High S/N ratio and Low THD reproduces powerful and detailed sound.
- OPERATION INDICATOR LED - LED display to check the operating status (ACT, STBY, POWER, SIG, CLIP, PROT, BRIDGED)
SPECIFICATIONS
| Model | D-3000 | ||
| Rated Output (STEREO) |
8 per channel, stereo | 600W | |
| 4 per channel, stereo | 1200W | ||
| 2 per channel, stereo | 1500W | ||
| Input Sensitivity (rated output power@8) | 1.23Vrms | ||
| Voltage Gain (rated output power@8) | 35dB | ||
| Frequency Response | 20Hz ~ 20kHz, 0dB ±3dB | ||
| THD (1/3 rated output power @8) | Less than 0.1% | ||
| Residual Noise (Volume MAX@8) | Less than -60dB | ||
| S/N (rated output power@8, 20Hz~20kHz) | 100dB | ||
| Output Circuit | Class D | ||
| Input Impedance | 10 kΩ Balanced | ||
| Indicator | SIG(-30dB, -10dB), Clip, Prot | ||
| Safety Circuit | Full Short Circuit Protection, Thermal Protection | ||
| Power ON/OFF Muting, DC Output Protection | |||
| DSP Function | Input volume, LPF, HPF, Delay, Limiter,7-band EQ, Output level meter | ||
| Input Terminal | Analog: XLR Female, Digital: Dante Network Audio | ||
| Output Terminal | 4 Pole Speaker Socket | ||
| Operating Temperature / Humidity | Operating Temperature: -10 ~ +40 | ||
| Humidity: 0% ~ 90% | |||
| Power Source | AC 220–240V, 50/60Hz (supplied AC mains transformer depends on country requirements) |
||
| Power Consumption (1/8 rated output power @4) | 550W | ||
| Weight(set) | 7.63Kg / 16.8lb | ||
| Dimensions(set) | 482(W) x 88(H) x 420(D)mm / 19(W) x 3.5(H) x 16.5(D)inch | ||
